Customers of Glasswork can create unique architectural and interior projects in color with the maximum degree of individualization.
Digital printing on glass at RGC is a unique technology that allows you to reproduce any design or images of any format (including jumbo) on glass in the highest HD quality. The image is applied with ceramic sintered ink, resistant to any external impacts. If you already have an image that you would like to print on glass, our designer will check if it complies with the printing requirements.
The Spectrum range is for use in architecture and vehicle areas. The whole palette of colors according to the RAL scale. Printing of photorealistic images, graphics, painting, and imitation of natural materials.
The Etch range – to achieve a variety of glass etching effects in color and texture. Opal glass with a typical roughness. The drawing can be white or colored. Provides varying degrees of privacy, light diffusion and is ideal for sun protection.
The Anti-Slip range – anti-slip effect on glass. Complies with the highest requirements of architectural and industrial anti-slip coatings. They have excellent mechanical, chemical and UV stability. They can be colorless, transparent, colored or patterned.
Patterned glass (*always tempered/heat-strengthened)
Curved (bent) glass
Laminated glass (triplex)
Curved (bent) triplex
Insulated glass unit
Curved (bent) glass unit
Type of glass | Minimum size | Maximum size |
|---|---|---|
polished glass low-emissivity glass sun-protective glass multifunctional glass |
100 х 250 mm |
4 mm – 1500 х 2500 mm |
5 mm – 2000 х 3000 mm | ||
6….19 mm – 3210 х 6000 mm |
All kinds of float glass, tinted glass, glass with solid pyrolysis-induced coatings, and some types of glass with a magnetron coating can be subjected to tempering:
AGC production – TopN+T, Energy NT, StoprayT.
Guardian production – HT-Version, SunGuard Solar, SunGuard High Performance.
Pilkington production – Pro-T, Optitherm, Suncool.
* For more information, consult our experts.
Production technology:
Thermally tempered glass – glass is subjected to special heat treatment; it is heated to approximately 600 ° C, then rapidly cooled by air jets. On the surface of the glass there is a body-stressed state. This makes it more resistant to mechanical and thermal loads and gives the required parameters in the destruction of fragmentation. Tempered glass is not possible for a subsequent treatment, so there is tempered not a sheet glass but the product after being sliced to the required size and processed. Production facilities of JSC “RGC” are equipped with the modern tempering furnaces Tamglass, providing tempering of complicated coated glass also in jumbo-format.
1. Incoming inspection of materials and components
2. Tempered glass of JSC “RGC” production is manufactured in accordance with GOST 33087-2014, which is confirmed by certificates of compliance and test protocols for manufactured products.
In accordance with GOST the tempered glass passes through the following types of tests:
Test of mechanical strength
Test on the nature of destruction
Testing the optical characteristics
3. The tempered glass produced by the JSC “RGC” complies with the international standards EN -12150:2000, EN 14179:2001, DIN 1249.
4. Tempered glass of JSC “RGC” production is manufactured in accordance with STO 94610236-004 dated 2014. “Safety glass tempered”
5. Quality management system compliance to international standard ISO 9001:2008
6. The possibility of conducting a Heat Soak Test in order to significantly reduce a probability of spontaneous tempered glass destruction.
Manufacturing of Jumbo-format tempered glass
The possibility of tempering low-emissivity coated glass
High optical and mechanical characteristics, conforming to GOSTs, European and world standards